Raymarine ST50 plus Uživatelský manuál stáhnout pdf (Strana 19)

ST50

plus

Tridata and Repeater Operation and Installation Handbook

Chapter 6: Calibration

DEPTH

UNITS

DEEP ALARM

OFFSET

Initial Calibration Notes

UIlik

Press RESET to toggle the depth units between feet and metres.

Shallow

Alarm

Use the TRIP or RESET keys to set the required shallow depth alarm.

Deep/Alarm

Press the TRIP or RESET keys to set the required deep alarm.

Note:The

shallow and deep alarms are enabled by pressing the SPEED key.

offset

The offset, keel or waterline, is set using the TRIP or RESET keys.

Negative figure = keel off set

Posiie figure = waterline off set

Countdown

AlarmStatus

The countdown alarms can be turned on or off using the RESET key:

El = Alarm on (enabled)

EO = Alarm off (disabled)

Log Calibration

‘\b

Refer to section 6.2 for complete details on setting log calibration.

Exit Initial Calibration

To exit initial calibration and store the new settings, press DEPTH and SPEED

together for 2 seconds.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Ff 27 Mar 2025 | 12:48:45

Notice st50

Raymarine ST50 plus Uživatelský manuál Strana 19