Raymarine DS400X Specifikace stáhnout pdf (Strana 22)

12 DS400X and DS500X Digital Fishfinders

2.6 System Connections

The rear of the fishfinder provides the following connection sockets:

• Power/NMEA

• Transducer

Figure 2-4: DS400/500X Connector Panel

DC Power and NMEA Connection

The DS400/500X is intended for use on boat’s DC power systems rated from

10-18 Volts DC (13.8V nominal).

A 5 ft (1.5 m) cable is supplied for connecting the boat’s DC power and

NMEA interface to the unit. This Power/NMEA cable can be extended by up

to 60 ft (20 m) using a wire gauge of AWG 12 or greater.

The cable’s molded end attaches to the seven-pin Power/NMEA connector

on the unit’s connector panel.

The cable connector (viewed from the outside) is shown in the following

drawing.

Figure 2-5: Power Cable Connector

The exposed wires on the open end of the cable should be connected as

follows:

Power/NMEATransducer

D6459-2

D6462-2

pin1

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 91 92

Žádné komentáře

Raymarine DS400X Specifikace Strana 22