Raymarine ST1000 Plus Specifikace stáhnout pdf (Strana 43)

Chapter 4: Installing the Tiller Pilot 41

Mounting the socket

Install the tiller pilot socket as follows:

1. Attach the template (provided at the back of this handbook) to the selected

bulkhead.

2. Carefully drill a 21 mm (

in) clearance hole for the cable boss.

3. Drill 4 pilot holes (2.5 mm or

in) for the self-tapping screws.

4. Remove the template.

5. Pass the power cable and any other cables (SeaTalk and NMEA) through the

bulkhead and the gasket.

6. Use a small flat-bladed screwdriver to connect the cable(s) to the socket –

refer to the illustrations on the following pages to identify the individual con-

nections on the SeaTalk socket. Ensure that the socket is oriented correctly

and note the connection numbers in relation to the keyway..

D3296-2

Cable

Gasket

Socket

Rubber cap

Screw

Plug

Floating nut

Retaining ring

Installed socket

81130_6.book Page 41 Wednesday, March 8, 2006 3:12 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Žádné komentáře

Raymarine ST1000 Plus Specifikace Strana 43