Raymarine SmartPilot SPX-30 Instalační manuál stáhnout pdf (Strana 27)

Chapter 3: Check and adjust settings 19

Counter rudder

Counter rudder is the amount of rudder the SmartPilot X system applies to try to

prevent the boat from yawing off course. Higher counter rudder settings result in more

rudder being applied.

The default counter rudder gain is set as part of the

initial seatrial Autolearn process.

1. Use < or > to increase or decrease the setting.

2. Press

ENTER

to accept the new value.

Rudder damping

On SmartPilot X systems with a rudder reference transducer, you can set the rudder

damping to prevent autopilot ‘hunting’. Increasing the rudder damping value reduces

hunting. When adjusting the value, increase the damping one level at a time until the

autopilot stops hunting. Always use the lowest acceptable value.

1. Use < or > to increase or decrease the setting.

2. Press

ENTER

to accept the new value.

Screen Text Range

Counter Rudder

1 to 9 (Do NOT set to 0)

Screen Text Range

Rudder Damping

1 to 9

Press ENTER to select.

Counter Rudder

10884-1

The rate of return of the rudder

once on the new heading.

Press ENTER to select.

Rudder Damping

D10896-1

Prevents the rudder from

oscillating.

81287_1.book Page 19 Tuesday, March 18, 2008 11:50 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Žádné komentáře

Raymarine SmartPilot SPX-30 Instalační manuál Strana 27