Raymarine SmartPilot SPX-30 Instalační manuál stáhnout pdf (Strana 33)

Chapter 3: Check and adjust settings 25

Wind selection

Note: Only available if wind data is available.

This option determines whether the boat steers to

apparent or true wind in Wind Vane mode.

1. Press

, then use < and > to scroll to

Autopilot Calibration and press

ENTER

2. Use < and > to scroll to

Vessel Settings

and

press

ENTER

3. Use < and > to scroll to

Sailboat Settings

and

press

ENTER

4. Use < and > to scroll to

Wind Selection

and

press

ENTER

5. Use < and > to switch between True and Appar-

ent.

6. Press

ENTER

to accept the change or

CANCEL

to exit without making any changes.

WindTrim

WindTrim controls how quickly the SmartPilot X system responds to changes in the

wind direction. Higher wind trim settings will result in a system that is more responsive

to wind changes.

1. Press

, then use < and > to scroll to

Autopilot Calibration and press

ENTER

2. Use < and > to scroll to

Vessel Settings

and

press

ENTER

3. Use < and > to scroll to

Sailboat Settings

and

press

ENTER

4. Use < and > to scroll to

Wind Trim

and press

ENTER

5. Use < and > to increase or decrease the auto

tack delay.

6. Press

ENTER

to accept the change or

CANCEL

to exit without making any changes.

Press ENTER to select.

Sailboat Settings

Wind Selection

D10855-1

Press ENTER to select.

Wind Selection

D10854-1

Select wind source.

True

Press ENTER to select.

Sailboat Settings

Wind Trim

D10853-1

Press ENTER to select.

Wind Trim

D10852-1

Controls the sensitivity of the

pilot when steering to wind.

81287_1.book Page 25 Tuesday, March 18, 2008 11:50 AM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Komentáře k této Příručce

Žádné komentáře

Raymarine SmartPilot SPX-30 Instalační manuál Strana 33

Komentáře k této Příručce